Category：Anti-dustmite finishing agent
Properties:
| Appearance | Slightly yellowish liquid |
Ionicity |
Non- ionogenic |
Solubility |
Dispersible in water. Soluble in esters and glycols. |
pH value |
pH of 1% solution is 5.5 - 7.5. |
Density at 20°C |
1.02-1.05 g/cm3 |
Temperature stability |
Drying/fixing: up to 150°C |
Fastness |
Wash-fast up to 60°C. Highest wash-fastness can be achieved on cotton in combination with EMP FIX-ET. Fast to dry cleaning as well as light, rubbing and ironing. No effect on handle and electrostatic charge. Fastness of formulations with other textile chemicals should be tested in advance. |
Advantages:
- Washfast protection against dust mites
- Having no influence on the colour or whiteness of the textiles
- Meeting Oeko-Tex Standard 100, classⅠ–IV.
Application fields:
Moth-proofing agent EMP WAI-100 is a newly and highly efficient moth proofing agent for wool,wool blends, feathers and animal hairs. It can be used with conventional dyeing and after-finishing together. The treated fabric features excellent anti-moth effect and durable property. There is no influence on handling, strength, shade and fastness of the treated fabric. The property of wool fiber and its textile products treated by EMP WAI-100 have been achieved meeting the top standard of International Wool Bureau. The treated woll fabrics has excellent moth proofing property after washing, and has excellent fastness to sunlight.
Concentration |
Wash-fast anti dust mite protection up to 10 times, 40°C: 1.5-2.0% of EMP AM-100 relative to the dry weight of the textiles to be finished. |
Padding |
Undiluted EMP AM-100 should be added to the bath as last component while stirring to homogenity. Optimal results are achieved at pH 4-7. The absorption properties may be improved by adding a wetting agent. |
Foam application |
EMP AM-100 should be mixed into the foam bath according to the instructions for the foaming agent. To obtain sufcient penetration on medium-thick and thick fabrics, foam application must be made on humid material. |
Coating |
EMP AM-100 can be mixed with aqueous back-lling. The compatibility has to be checked beforehand. |
Spray application |
EMP AM-100 can only be sprayed in diluted form (at least 1:50 with water). Spray applications have to comply with occupational health requirements. |
Further treatment |
The goods are dried without any further rinses. The drying temperature should be kept as low as possible. |
Package
25kg plastic barrel or others designated by the customers.
Note:
The data contained here are based on our current knowledge and experience. It is the responsibility of user to test our products before the final application.
